A cartridge heater is an electrical load that consists of a heating coil. The coil is made from a metal alloy, usually nickel chromium, and is wound around a ceramic core. The number of spirals per inch determines the watt density of the heating coil. The wire passes an electric current, which heats up the sheath of the cartridge heater. It is filled with insulation, such as magnesium oxide, which helps protect the nichrome wire from contaminants. Click here – https://ramacorporation.com/products/cartridge-heater/
The Cartridge Heaters Can Maintain A High Temperature For Long Periods
The nip and tuck type of cartridge heaters should fit into the work piece perfectly. If the heater is too large, it could seize the work piece. To prevent this from occurring, the outside diameter of the heating element should be larger than the inside diameter of the bore. When a 0.5-inch nominal diameter heater is ordered, the manufacturer will typically downsize it by 0.002″ to 0.05”, ensuring that the machine will fit.
The dielectric strength of a cartridge heater is critical to its effectiveness. When properly fitted, it transfers heat from the metal to the sheath. Because the sheath is heated by the electric current, the cartridge heaters can maintain a high temperature for long periods. During installation, general purpose drills are generally sufficient. When selecting the heater, be sure to use a drill with.003″ to.008″ over the diameter of the hole. If the sheath is too long, use a smaller screwdriver.